HOME | CONTACT US | IIE MY ONLINE TRAINING
WHY IIE TRAINING CENTER?
EXPLORE OUR TRAINING
INSTRUCTORS
GENERAL INFORMATION
FAQ
 
PE Exam Review Online On-Demand
2.8 CEUs

Overview:

Improve your odds of passing the most important test of your career with this popular review course. Licensure for professional engineers opens the door to a world of opportunity and career development. But first you must pass two exams: the Fundamentals of Engineering exam and the PE exam. The course instructors will cover all major elements of the PE exam, refreshing your knowledge of IE topics, terminology and formulas; working through practice problems; and identifying areas you need to focus on during your exam prep. The course reviews the key concepts from the industrial engineering body of knowledge as well as presenting sample exam questions. Since the exam changes from year to year there is no guarantee that all possible example questions will be covered.   This course includes an online version of the "Sample P.E. Exam in Industrial Engineering Third Edition" by W. J. Kennedy, Ph.D.,P.E.  Individuals preparing for the exam may wish to purchase the Review for the PE Exam.   It is available at http://www.iienet2.org/Bookstore.aspx. Participants in the review course will receive a specially developed set of review notes available only to registrants for the class. 

Reminder:  You must register for the exam with your state board. 

What You Will Learn:

  • Identify individual strengths and weaknesses in the IE body of knowledge
  • Prepare to sit for the NCEES* principles and practices exam
  • Comprehend the requirements for the NCEES IE principles exam 
  • Demonstrate professional industrial engineering methods
                                  *National Council of Examiners for Engineering and Surveying 

Online Content

The On-Demand course is divided into ten units and a practice exam. Each unit includes 30 or more minutes of recorded material (audio and video). 

  • Section 1: Introduction
  • Section 2: Systems Definition, Analysis, and Design
  • Section 3: Statistics Part 1
  • Section 3: Statistics Part 2
  • Section 4: Quality Engineering Part 1
  • Section 4: Quality Engineering Part 2
  • Section 5: Facilities Engineering and Planning
  • Section 6: Supply Chain and Logistics
  • Section 7: Work Measurement
  • Section 8: Ergonomics and Safety
  • Sample PE Exam 

Requirements

  • Users of On Demand Seminars must have an established Internet connection.
  • Access to content is only available for six(6) months from the date of purchase.
  • You must have access to browser that supports Flash.

On Demand Viewing Tips 

How to Access

After you have registered for the course you will be e-mailed a receipt for your purchase. At the bottom of  that receipt will be the link to the login page. Alternatively, you can reach the login page by clicking the "My Account" link at the top of the training website (www.iietrainingcenter.org).  Login with your user name and password you setup during the registration process and you will see a list of the online courses you have purchased with their expiration dates. Click the "Select" link next to the course you wish to view. You will then be taken to a page with links to the Units. Simply click the "Launch" button next to the Unit you wish to view.

Course

I.    Systems Definition, Analysis, and Design

Approximate percentage of examination - 20 percent

  1. System analysis and design tools (e.g., flowcharts, Pareto charts, affinity diagrams, nominal group technique, input/output analysis)
  2. Requirements analysis (e.g., value stream mapping)
  3. Performance measures and applications (e.g., leading, lagging, structure)
  4. Modeling techniques (e.g., simulations, queuing, linear programming, Markov chains)
  5. Process types (e.g., discrete versus continuous, manufacturing, service)
  6. Model interpretation (e.g., sensitivity analysis)
  7. Model verification
  8. Model validation
  9. Bottleneck analysis (e.g., theory of constraints)
  10. Value analysis and engineering (e.g., risk analysis)
  11. Project management and planning (e.g., PERT/CPM; balancing risk, cost, scope, and time; Gantt charts)

II.    Facilities Engineering and Planning

Approximate percentage of examination - 20 percent

  1. Process flow
  2. Network optimization
  3. Layout design techniques (e.g., systematic layout planning [SLP], affinity diagram, relationship diagrams, center of gravity rule)
  4. Space analysis (e.g., equipment needs, demand, location, footprint of the equipment/WIP sizing)
  5. Capacity analysis (e.g., calculation of personnel requirements, calculation of machine requirements)
  6. Cost-benefit analysis
  7. Site selection factors
  8. Site selection methods (e.g., prioritization, factor weighting)
  9. Unit load analysis
  10. Life cycle cost analysis (e.g., acquisition, implementation, sustainment, retirement)
  11. Material handling techniques and equipment (e.g., conveyors, industrial trucks, manual, overhead crane)

III.    Supply Chain and Logistics

Approximate percentage of examination - 20 percent

  1. Forecasting methods (e.g., exponential smoothing, moving averages, seasonal)
  2. Production planning methods (e.g., aggregate, MRP, MRPII, ERP, JIT, Kanban, lean manufacturing)
  3. Engineering economics (e.g., break-even analysis, technical capability assessment, ROI)
  4. Costing systems (e.g., activity-based costing including cost drivers, guidelines for overhead)
  5. Production scheduling methods (e.g., shortest processing time first, due date order)
  6. Inventory management and control
  7. Distribution methods (e.g., transshipment, routing)
  8. Storage and warehousing methods
  9. Transportation modes (e.g., truckload [TL], less than truckload [LTL], air, rail, ship, special requirements)

IV.    Work Design

Approximate percentage of examination - 20 percent

  1. Motion economy rules (e.g., therbligs)
  2. Line balancing
  3. Work measurement systems techniques (e.g., stopwatch, predetermined time systems, proprietary process determined time system)
  4. Time-study techniques (e.g., motion study, man-machine charts, predetermined time systems)
  5. Time-standard tools (e.g., learning curve, training program)
  6. Sample size calculations
  7. Observation frequency methods
  8. Work sampling analysis
  9. Safety codes, standards, and voluntary guidelines (e.g., ANSI, OSHA, MIL STD, NIOSH)
  10. Methods for quantifying risk factors (e.g., NIOSH lifting equation, OSHA limits for noise)
  11. Coefficient of friction (slip resistance)
  12. Rapid upper limb assessment (RULA)
  13. Limits of human capacity
  14. Lifting aids (e.g., gait belts, cranes)
  15. Link analysis and associated criteria (e.g., importance, frequency of use)
  16. P. Workplace design/human–computer interaction (e.g., use of anthropometric data)
  17. Days Away, Restricted, and Transferred (DART) rate calculations (e.g., injury/illness incident rate and/or the management of the information required to calculate this rate)

V.    Quality Engineering

Approximate percentage of examination - 20 percent

  1. Statistical process control (e.g., control chart construction and interpretation)
  2. Process capability analysis (e.g., Cpk, Cp)
  3. Acceptance sampling (e.g., single sampling, double sampling, MIL STD 105E, Dodge Romig, OC-curves)
  4. Continuous improvement methods (e.g., Deming, Kaizen, TQM, Six Sigma)
  5. Techniques for process improvement (e.g., design of experiments [DOE], Taguchi, FMEA)
  6. Reliability analysis
  7. Maintenance procedures (e.g., reactive, preventive, predictive)
  8. Quality management system (e.g., ISO9000, benchmarking)
  9. Root cause analysis
 

registration fee

Member: $1,595
Non-Member: $1,945

Register

Instructors

Larry Aft  Larry Aft, P.E.
Continuing Education Director for IIE 
Robert Atkins  Robert Atkins
Professor, Southern Polytechnic State University 
Del Kimbler  Del Kimbler
Professor (retired), University of Clemson 

 
TERMS OF USE | PRIVACY POLICY | © 2014 INSTITUTE OF INDUSTRIAL ENGINEERS