​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​
Home
Membership
Communities & Groups
Training
Conferences
Publications & Resources
Career Center
 

Z94.12.7 Welding

A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z |

 

FACE OF WELD. The exposed surface of a weld on the side from which welding is done.

FAYING SURFACE. That surface of a member which is in contact or close proximity with another member to which it is to be joined.

FILLER LENS. A filler, usually colored glass, used in goggles, helmets and handshields to exclude harmful light rays.

FILLER METAL. The metal to be added in making a welded, brazed, or soldered joint.

FILLET WELD. A weld of approximately triangular cross section joining two surfaces approximately at right angles to each other in a lap joint.

FLASH. The molten metal which is expelled, or which is squeezed out by the application of pressure, and solidifies around the weld.

FLASHBACK. A recession of the flame into or back of the mixing chamber of the torch.

FLASHING TIME. The time during which the flashing action is taking place in flash welding.

FLASH WELDING. A resistance-welding process wherein coalescence is produced, simultaneously over the entire area of abutting surfaces, by the heat obtained from resistance to electric current between the two surfaces, and by the application of pressure after heating is substantially completed. Flashing and upsetting are accompanied by expulsion of metal from the joint.

FLAT POSITION. The position of welding wherein welding is performed from the upper side of the joint and the face of the weld is approximately horizontal.

FLUX. Material used to prevent, dissolve or facilitate removal of oxides and other undesirable substances.

FLUX CORED ARC-WELDING. An arc-welding process wherein coalescence is produced by heating with an arc, between a continuous filler metal (consumable) electrode and the work. Shielding is obtained from a flux contained within the electrode. Additional shielding may or may not be obtained from an externally supplied gas or gas mixture.

FOREHAND WELDING. A welding technique wherein the welding torch or gun is directed toward the progress of welding.

FORGE WELDING. A solid state welding process wherein coalescence is produced by heating and by applying pressure or blows sufficient to cause permanent deformation at the interface.

FRICTION WELDING. A solid state welding process wherein coalescence is produced by the heat obtained from mechanically induced sliding motion between rubbing surfaces. The work parts are held together under pressure.

FURNACE BRAZING. A brazing process in which the heat required is obtained from a furnace.

FUSION. The melting together of filler metal and base metal, or of base metal only, which results in coalescence.

< Previous | Next >

Print: Share: